| Customization: | Available |
|---|---|
| Portability: | No |
| Interface: | Wireless |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
C9115AXI-H Specification |
|
|
Description |
Cisco Catalyst 9115AX Series,H Domain |
|
Software |
•Cisco Unified Wireless Network Software Release 8.9 or later •Cisco IOS ® XE Software Release 16.11or later |
|
Supported wireless LAN controllers |
•Cisco Catalyst 9800 Series Wireless Controllers •Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
802.11n version 2.0 (and related) capabilities |
• 4x4 MIMO with four spatial streams •Ratio Combining (MRC) •802.11n and 802.11a/g beamforming •20- and 40-MHz channels •PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •802.11 Dynamic Frequency Selection (DFS) •Cyclic Shift Diversity (CSD) support |
|
802.11ac |
•4x4 downlink MU-MIMO with four spatial streams •MRC •802.11ac beamforming •20-, 40-, 80-, and 160-MHz channels •PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •802.11 DFS •CSD support |
|
802.11ax |
•4x4 downlink MU-MIMO with four spatial streams •Uplink/downlink OFDMA •TWT •BSS coloring •MRC •802.11ax beamforming •20-, 40-, 80-, and 160-MHz channels •PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •802.11 DFS •CSD support |
|
Integrated antenna |
•2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth •5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
|
External antenna (sold separately) |
•Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) •Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
|
Interfaces |
•1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) - IEEE 802.3bz •Management console port (RJ-45) •USB 2.0 (enabled via future software) |
|
Indicators |
•Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
|
Dimensions (W x L x H) |
• Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
|
Input power requirements |
•802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) •Cisco power injector, AIR-PWRINJ6= •802.3af PoE •Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
|
Environmental |
Cisco Catalyst 9115AXI •Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) •Nonoperating (storage) altitude test: 25˚C, 15,000 ft. •Operating temperature: 32° to 122°F (0° to 50°C) •Operating humidity: 10% to 90% (noncondensing) •Operating altitude test: 40˚C, 9843 ft. Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE •Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) •Nonoperating (storage) altitude test: 25˚C, 15,000 ft. •Operating temperature: -4° to 122°F (-20° to 50°C) •Operating humidity: 10% to 90% (noncondensing) •Operating altitude test: 40˚C, 9843 ft. |
|
System memory |
•2048 MB DRAM •1024 MB flash |
|
Available transmit power settings |
2.4 GHz •23 dBm (200 mW) •20 dBm (100 mW) •17 dBm (50 mW) •14 dBm (25 mW) •11 dBm (12.5 mW) •8 dBm (6.25 mW) •5 dBm (3.13 mW) •2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm (0.39 mW) 5 GHz •26 dBm (400 mW) •23 dBm (200 mW) •20 dBm (100 mW) •17 dBm (50 mW) •14 dBm (25 mW) •11 dBm (12.5 mW) •8 dBm (6.25 mW) •5 dBm (3.13 mW) •2 dBm (1.56 mW) •-1 dBm (0.79 mW) •-4 dBm (0.39 mW) |
|
Frequency band and 20-MHz operating channels |
H(H regulatory domain): •2.412 to 2.472 GHz; 13 channels •5.180 to 5.320 GHz; 8 channels •5.745 to 5.825 GHz; 5 channels |
FAQ
1). How about the warranty for your products?
All of product we sell will provide one year warranty for free, please don't worry about the quality.
2). How long will you ship goods out when we order from you?
We will ship goods out within 24 hours when we get the order.
3). Which payment ways we can choose?
We can provide different payment ways for every clients, such as Paypal, West Union, T/T, and so on.
4). Which logistics will you use to ship goods to us?
DHL, Fedex, Aramex, TNT and other special logistics will be used for shippment.
Our Service
Condition: 100% new original item
Warranty: 1 year
Payment ways: T/T; West Union; Paypal; L/C
Chose for logistics: DHL; Fedex; TNT; UPS; Some special logistics
Produce for after-sale problem:
1.Provide product model and serial number.
2.Describe which problem the products appear
3.Analyze product problems and propose solutions
4.Repair the machine and return it to the customer
Packing & Delivery
Beijing Skylink Technology Co.,Ltd.(SKY-LINK) for China mainland business. Located in Beijing of China, Sky-Link are professional in networking equipments and accessories. No matter how the market changes, we will always offer you the reasonable price and quality service.
){kind=link}